Hitachi PB Series User Manual page 52

3–16 3.2 Printing Characters
2 Procedure for printing the numbers from 000001-001000 through 010001 to
991000 in the second line, by incrementing the printed number by one after every
printing.
1. Perform the steps 1 through 5 of procedure 1.
2. Change the following settings.
The cursor moves to the second line.
Initial value [000001
Range [000000
[991999
Update [000000]
[000001]
The following counting results are obtained. (Only the essential numbers for which
the count setup has been performed are shown.)
3. Press [Apply].
4. Press [Back].
You are then returned to the "Edit message" screen.
]
]
] Direction [1]
Jump [ • • 1000 ]
[ • • 0001 ]
.........
.........
.........
.........
Section 3