Monitor 2 Operations - Sanyo MPX-CD92P Instruction Manual

MONITOR 2 OPERATIONS

MON 2
Monitor 1
01 01 01 02 02 02 03 03 03
04 04 04 05 05 05 06 06 06 Monitor 2
07 07 07 08 08 08 09 09 09
4
Monitor 2
Monitor 1
01 01 01 02 02 02 03 03 03
04 04 04 05 05 05 06 06 06
Monitor 2
07 07 07 08 08 08 09 09 09
SEQUENCE
Monitor 2
English
Press the MON 2 button.
The MON 2 indicator will flash, and the live pictures display mode on monitor 2 can be
set. The available display modes are full screen or full screen automatic sequential
display.
Example: To display full screen the image from camera 4
Press the SELECT 4 button.
The camera 4 indicator lights, the image from camera 4 is displayed full screen.
01 01 01
04 04 04
To switch the display mode on monitor 2 from full screen to
full screen automatic sequential display
Press the SEQUENCE button.
The SEQUENCE indicator flashes and the pictures from each camera are displayed
sequentially full screen, on monitor 2, according to the monitor 2 sequential mode and
speed set in the (MONITOR SET) menu (see page 35).
01 01 01
To cancel the sequential display mode and the monitor 2 display settings
Press the SEQUENCE button, then press the MON 2 button.
TO DISPLAY ON MONITOR 2 THE SAME IMAGE AS ON
MONITOR 1
Press the MON 2 button.
01 01 01
This function can be used to monitor the images from a second location.
In the (MONITOR SET) menu, set the item "MON2 ←MON1" to "ON" (see page 35).
NOTE: When this setting is used, the MON 2 button will not be operate.
Live pictures will be displayed on monitor 2
even during VCR playback mode
on monitor 2
17
Live picture mode