Troubleshooting - Sealey pc310 Instructions For Use Manual

13. TROUBLESHOOTING

Cleaner will not operate.
Dust comes from the motor cover.
Reduced efficiency and increased
Motor speed/vibration.
No solution spraying out.
Leak from drum connector
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and
Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling information.
© Jack Sealey Limited
No power supply.
Faulty power cable, switch or motor.
Container full of liquid.
Filter missing or damaged.
Filter clogged.
Nozzle, hose or container inlet blocked.
Switch in wrong position.
Shampoo tank is empty.
Incorrectly fitted trigger or pipes.
O Ring on male connector damaged
01284 757500.
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
Original Language Version
Check supply.
Check and repair or replace faulty item.
Empty container
Fit or replace dust filter.
Clean or replace filter.
Check nozzle, hose and container inlet for
blockage.
Turn switch to the required position.
Add more shampoo.
Check fittings and connections. Ensure there
are no
Kinks in tubes
Replace O Ring.
www.sealey.co.uk
01284 757500
01284 703534 sales@sealey.co.uk
PC310 Issue:7(S) - 27/05/15