Advertisement
7.2.3. AIR OUTLET FILTER.
Behind the side grille in the motor head a special filter is located (fig 28) which ensures the air returned to the environment is as free
as possible from impurities. The filter will require periodic changing, to do so use a coin (or similar) to gently lever off the grille,
remove the filter and replace with a new one. When refitting the grille ensure the arrow on the inner part of the grille points upwards.
We recommended you keep a spare of each filter type.
8.
TROUBLESHOOTING
Unit does not start.
Dust comes from the motor unit.
Low efficiency.
Filter problems.
Motor speed increases
or motor vibrates.
Foam comes out of the air filter.
Detergent solution spray not
uniform.
We, the sole importers into the UK, declare that the product listed below is in conformity with the following EEC standards and directives.
Auto Valet Model: VMA913
73.23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
CONSUMABLES
Part No VMR921 Detergent for Valet Machine . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
Part No VMR925 Detergent for Valet Machine . . . . . . . . . . . . . Packs of 4 x 5 Ltr Containers.
Part No VMR922 Defoaming Agent . . . . . . . . . . . . . . . . . . . . . Packs of 12 x 1 Ltr Bottles.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
01284 757500
No current. The power cable, switch,
or motor faulty. Tank may be full of water.
Damaged filter, or filter incorrectly fitted.
Container is full. Filter obstructed.
Hose or accessory blocked.
Outlet filter obstructed. Hose or tool blocked.
Container is full. Filter obstructed.
Hose or accessory blocked.
Wrong detergent used, or used on carpet
or fabric previously cleaned with foaming
detergent.
Detergent filter clogged.
Pick up pipe clogged.
Declaration of Conformity
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products
Sole UK Distributor
Sealey Group
Bury St. Edmunds, Suffolk .
01284 703534
fig 28
Remove grille and
replace filters
Check the plug and fuse. Repair or
replace faulty part. Empty tank if full.
Reposition or replace the filter.
Take care, as warranty may be lost.
Empty container. Clean or replace the
filter (Chapter 7). Unblock hose or accessory.
Check, clean, or replace the filter (chapter 7).
Remove any obstruction from hose.
Empty the container, clean, refit, or replace
filter (Chapter 7). Unblock hose or accessory.
Add Sealey VMR922 Anti-foaming
agent to waste water tank (see 5.1).
Remove filter and clean (see 7.2.1) .
Remove pick up pipe and clean filter (7.1.2).
The construction file for this product is held by the Manufacturer
and may be inspected on request by a national authority upon request
to Jack Sealey Ltd.
sales@sealey.co.uk
e-mail
3rd October 2003
www.sealey.co.uk
9A>
VMA9133 - 3 - 031003
Advertisement
