Table of Contents
Advertisement
Prune stations - DAB
If you move to a different part of the country, some of the stations which
were listed may no longer be available. Also, from time to time, some DAB
services may stop broadcasting, or may change location or frequency.
Stations which cannot be found, or which have not been received for a
very long time are shown in the station list with a question mark.
The Prune stations function will delete the marked DAB stations from
your station list.
1. Press and release the On/Off button to switch on your radio.
2. If you are listening in FM mode, press and hold the Mode button.
'DAB' will show on the display.
3. Press and release the Menu button. The DAB menu will show on the
display.
4. Rotate the Tuning/Select control until 'PRUNE' shows on the display.
5. Press and release the Tuning/Select control. 'SELECT' will show on
the display.
6. Press and release the Tuning/Select control to cause the invalid
station names to be removed from the station list. The display will
return to station name display after several seconds.
If you do not wish to prune stations press the Menu button to return
to the previous display.
Note: If you have moved your radio to a different part of the country you
should also carry out a search for new stations (please see the section
'Finding new stations' on page 9).
1
2-6
4-6
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Play 10 and is the answer not in the manual?
Questions and answers
how to reset radio to manufacturing status
To reset the Roberts Play 10 radio to factory settings, follow these steps:
1. Press and release the On/Off button to switch on the radio.
2. Press and release the Menu button. The main menu will appear on the display.
3. Rotate the Tuning/Select control until 'SYSTEM' appears on the display, then press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until 'FACTORY' appears on the display, then press and release the Tuning/Select control. 'RESET' will be shown on the display.
5. Press and release the Tuning/Select control to confirm.
6. The radio will perform a full reset, erasing the station list and presets. The display will show 'RESTART' followed by 'WELCOME', and a station scan will start automatically. The display will show the progress of the station search.
This process restores the radio to its original factory settings.
This answer is automatically generated