Table of Contents
Advertisement
Software version
The software version display cannot be altered and is just for your reference.
1. Press and release the On/Off button to switch on the radio.
2. Press and release the Menu button. The main menu will show on the
display.
3. Rotate the Tuning/Select control until 'SYSTEM' appears on the
display. Press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until 'SW VER' appears on the
display. Press and release the Tuning/Select control to display the
software version.
5. Repeatedly, press and release the Menu button to return to the normal
radio display.
2,5
3,4
18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Play 10 and is the answer not in the manual?
Questions and answers
how to reset radio to manufacturing status
To reset the Roberts Play 10 radio to factory settings, follow these steps:
1. Press and release the On/Off button to switch on the radio.
2. Press and release the Menu button. The main menu will appear on the display.
3. Rotate the Tuning/Select control until 'SYSTEM' appears on the display, then press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until 'FACTORY' appears on the display, then press and release the Tuning/Select control. 'RESET' will be shown on the display.
5. Press and release the Tuning/Select control to confirm.
6. The radio will perform a full reset, erasing the station list and presets. The display will show 'RESTART' followed by 'WELCOME', and a station scan will start automatically. The display will show the progress of the station search.
This process restores the radio to its original factory settings.
This answer is automatically generated