Fusible Links; Fuse Block Location; Passenger Compartment - Mitsubishi OUTLANDER Manual
Hide thumbs
Also See for OUTLANDER:
- Manual (714 pages) ,
- Service manual (63 pages) ,
- Owner's manual (434 pages)
Table of Contents
Advertisement
Vehicle care and maintenance
Fusible links
The fusible links will melt to prevent a fire if a large current
attempts to flow through certain electrical systems.
In case of a melted fusible link, see your authorized Mitsubishi
Motors dealer or a repair facility of your choice for inspection
and replacement.
For the fusible links, please refer to "Fuse load capacities" on
page 7-42.
WARNING
!
Fusible links must not be replaced by any other
device. Failing to fit the correct fusible link may
result in fire in the vehicle, property destruction and
serious or fatal injuries at any time.
7
7-42
N00942700262
Fuse block location
To prevent damage to the electrical system from short-circuit-
ing or overloading, each individual circuit is equipped with a
fuse. The fuse blocks are located in the passenger compartment
and in the engine compartment.
Passenger compartment
A- Main fuse block
B- Sub fuse block
The fuse blocks in the passenger compartment are located
behind the personal compartment.
Fuses
N00942800827
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OUTLANDER and is the answer not in the manual?
Questions and answers
When driving on the highway within the speed limit, my 209 Mitsubishi outlander 4 cylinder 2.7 engine tells me to slow I do it but it comes to a slow stop on its own. I wait a few minutes it starts up and running again. Any idea why this is happening?
i have a 2024 outlander does it have an A and B odmeter reading and if so how do i use it
Yes, the 2024 Mitsubishi Outlander has multiple trip odometer readings, referred to as manual reset 1, manual reset 2, and an auto refuel reset. Users can switch between these readings using the scroll button on the steering wheel. To reset a trip odometer, they can press and hold the scroll button, then confirm the reset option. The auto refuel reset will automatically reset when refueling the fuel tank.
This answer is automatically generated
most cars that i have owned have had an a and b odmeter so that i can see gas mileage from fill up to fill up, i own a 2024 outlander se, if so how do i find it and utlize it.
To find and use the A and B odometer (trip meters) on a 2024 Mitsubishi Outlander SE to track gas mileage:
1. Access the Trip Meter: Use the scroll button on the steering wheel to cycle through the display options until you reach the trip odometer (Trip A or Trip B).
2. Reset the Trip Meter: Press and hold the scroll button to bring up the reset menu. Select the option to reset Trip A or Trip B.
3. Track Gas Mileage: After resetting, drive as usual and note the mileage before refueling.
4. Calculate Mileage: When refueling, record the miles driven and divide by the gallons of fuel added to determine miles per gallon (MPG).
This process helps in manually tracking fuel efficiency over different trips.
This answer is automatically generated
navagation system