If this warning light comes on or flashes while you're driving...
NOTE
For information regarding warning displays in the multi-information display, refer to "Multi-information display" on page 3-
160.
These warning lights will come on for a few seconds for a bulb check when the ignition switch is first turned to "ON".
Warning lights
Charging system warning light
or
Brake warning light
or
Engine malfunction indicator
("SERVICE ENGINE SOON" or
"Check engine light")
Park your vehicle in a safe place and stop the engine.
Contact your Mitsubishi Motors dealer or a repair facility of your choice for
assistance.
If this light comes on while driving, check to see that the parking brake is
fully released.
If this light stays on after releasing the parking brake, immediately stop and
check the brake fluid level.
If the brake fluid level is correct, there may be a system malfunction. Avoid
hard braking and high speed, and contact an authorized Mitsubishi Motors
dealer or a repair facility of your choice for assistance.
Although your vehicle will usually be drivable and not need towing, have the
engine system checked at an authorized Mitsubishi Motors dealer or a repair
facility of your choice as soon as possible. If the vehicle is not drivable, con-
tact emergency roadside assistance at 1-888-648-7820 (for vehicles sold in
U.S.A.) or 1-888-576-4878 (for vehicles sold in Canada), an authorized Mit-
subishi Motors dealer, or local towing company for assistance.
Do this
Quick index
N00200701064
Ref. Page
P. 3-208
P. 3-206
P. 3-207
1
Need help?
Do you have a question about the OUTLANDER and is the answer not in the manual?
Questions and answers
When driving on the highway within the speed limit, my 209 Mitsubishi outlander 4 cylinder 2.7 engine tells me to slow I do it but it comes to a slow stop on its own. I wait a few minutes it starts up and running again. Any idea why this is happening?
i have a 2024 outlander does it have an A and B odmeter reading and if so how do i use it
Yes, the 2024 Mitsubishi Outlander has multiple trip odometer readings, referred to as manual reset 1, manual reset 2, and an auto refuel reset. Users can switch between these readings using the scroll button on the steering wheel. To reset a trip odometer, they can press and hold the scroll button, then confirm the reset option. The auto refuel reset will automatically reset when refueling the fuel tank.
This answer is automatically generated
most cars that i have owned have had an a and b odmeter so that i can see gas mileage from fill up to fill up, i own a 2024 outlander se, if so how do i find it and utlize it.
To find and use the A and B odometer (trip meters) on a 2024 Mitsubishi Outlander SE to track gas mileage:
1. Access the Trip Meter: Use the scroll button on the steering wheel to cycle through the display options until you reach the trip odometer (Trip A or Trip B).
2. Reset the Trip Meter: Press and hold the scroll button to bring up the reset menu. Select the option to reset Trip A or Trip B.
3. Track Gas Mileage: After resetting, drive as usual and note the mileage before refueling.
4. Calculate Mileage: When refueling, record the miles driven and divide by the gallons of fuel added to determine miles per gallon (MPG).
This process helps in manually tracking fuel efficiency over different trips.
This answer is automatically generated
navagation system