Zone Transmit; Pitch Bend (Transmit Pitch Bend); After Touch (Transmit After Touch); Cc (Transmit Control Change) - Yamaha Montage 7 Reference Manual

Reference
Performance

Zone Transmit

From the Zone Transmit display you can set how each individual zone affects transmission of various MIDI
data, such as Control Change and Program Change messages. When the relevant parameter is set to
"on," playing the selected zone will transmit the corresponding MIDI data.
All settings made in this display are not available when "Transmit Ch" is set to "Off" in the Zone Setting
display.
To activate this display, select [UTILITY]  [Settings]  [Advanced], then set "Zone Master" to "ON."
For details, refer to the Owner's Manual.
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON] 
Operation
[Part Settings]  [Zone Transmit]
Pgm Change (Transmit Program Change)
Determines whether Program Change messages are transmitted to the external tone generator or not.
Settings:
Off, On
Bank Select (Transmit Bank Select)
Determines whether Bank Select MSB/LSB messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On

Pitch Bend (Transmit Pitch Bend)

Determines whether Pitch Bend messages are transmitted to the external tone generator or not.
Settings:
Off, On

After Touch (Transmit After Touch)

Determines whether After Touch messages are transmitted to the external tone generator or not.
Settings: Off, On

CC (Transmit Control Change)

Determines whether Control Change messages are transmitted to the external tone generator or not.
Settings:
Off, On
Vol/Exp (Transmit Volume/Expression)
Determines whether volume messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
65