Midi Receive Channel; Keyboard Transmit Channel - Yamaha SY55 Product Manual

Summary: Sets the SY55 MIDI receive channel to
any channel between 1 and 16, or the "omni"
mode for reception on all channels.
Settings:
Ch: 0 ... 16, omni
Note: all, odd, even
Procedure: Use the [ 1 and [ ] keys to select the
Ch" or "Note" parameter, then the [DATA EN-
TRY] control or [-1/NO] and [+1/YES] keys to set
as required. The numeric and [ENTRY] keys can
also be used to select the channel number.
Summary: Sets the MIDI transmit channel for the
SY55.
Settings: 1 ... 16.
Procedure: Use the [DATA ENTRY] control, the [-1/
NO] and [+1/YES] keys, or the numeric and [EN-
TER] keys to select the desired MIDI transmit
channel number,
Details: The MIDI transmit channel job is used pri-
marily to match the transmit channel of the SY55
with the receive channel of an external MIDI
device being driven by the SY55. When a multi-
1 3 4

MIDI RECEIVE CHANNEL

KEYBOARD TRANSMIT CHANNEL

Details: Make sure that the SY55 MIDI receive
channel is either set to the channel that your
keyboard/controller is transmitting on, or the
omni mode.
The "Notes = all" setting means that the
SY55 will play all notes received. If the "odd"
or "even" setting is chosen, the SY55 will play
only odd or even-numbered notes (based on their
MIDI note numbers) received from an external
MIDI controller or sequencer. This allows two
SY55's to be used — one set to "odd" and one to
"even" — to achieve 32-note polyphony.
Refer to: "ERROR MESSAGES," page 144.
play setup is selected, however, the MIDI trans-
mit channel setting also determines which of the
setup's voices is played via the SY55 keyboard.
Refer to: Tutorial, page 20.
JOB
JOB 6