Parent Unit - Alecto DVM-80 User Manual

3.2

PARENT UNIT:

Power:
The parent unit can be directly charged with the supplied rechargeable battery or through the
supplied power adapter with the thin plug. Once you connect the power adapter the battery will be
charged so that the parent unit can also be used mobile.
Battery:
1. Open the battery compartment of the parent unit by sliding off the battery cover on the back of
the parent unit.
2. Insert the supplied battery pack into the battery compartment so that the metal contacts on the
battery pack contact with the connections of the parent unit and push down the battery pack
gently until it clicks.
3. Slide the battery cover back on the parent unit.
Only use the supplied Li-Polymer battery (3.7V, 950mAh).
Power adapter:
1. Connect the 6V power adapter with the small plug 6V DC to the outlet on the right side of the
baby unit.
2. Plug the adapter in a 230V power outlet.
Only use the supplied power adapter with the thin plug and model number
S006MV0600080.
Make sure the power adapter cannot lead to stumble or fall. Bundle
to long wires with tape or with specially designed for this purpose
available wire wraps.
8
picture for reference only