Machine Specifications; Vibration; Labels And Symbols - Evolution EVOSAW355 Original Instructions Manual

SAW
355mm (14") STEEL
CUTTING CHOP SAW

MAChiNE SPECiFiCATiONS

METriC
Motor UK (230-240V ~ 50 Hz) 2200W
Motor UK (110V ~ 50 Hz) 1800W
Motor USA (120V ~ 60 Hz) 1800W
Horsepower 2.4
Speed (No Load) 1450min
-1
Weight 28kg
CuTTiNg CAPACiTiES METriC
Mild Steel Plate (Max Thickness) 12mm
Square Tube at 90° (Mild Steel) 120mm
Square Tube at 45° (Mild Steel) 80mm
Rectangle Tube at 90° (Mild Steel) 95 x 180mm
Rectangle Tube at 45° (Mild Steel) 78 x 110mm
Round Tube at 90° (Mild Steel) 130mm
Round Tube at 45° (Mild Steel) 105mm
Wood at 90° (Nominal Size) 89 x 184mm
Wood at 45° (Nominal Size) 64 x 89mm
Minimum Cut Off Piece Length 8mm
BLADE METriC
Diameter 355mm
Bore / Arbor 25mm
Number of Teeth 66
Kerf 1.7mm
NOiSE & ViBrATiON DATA
Sound Pressure Level L 108 dB (A) K = 3 dB(A)
PA
Sound Power Level L 121 dB (A) K = 3 dB(A)
WA
Vibration Level 1.39 m/s K = 0.5 m/s
2
MODEL PArT NuMBErS
United Kingdom 230V: 080-0001 110V: 080-0002
United States 080-0002
Europe 080-0003
*Supplied with a 355mm (14") Steel blade. To achieve maximum capacities stated, fit with a 380mm (15") industrial saw blade.
6
www.evolutionpowertools.com
SAW
355 380
380mm (15") STEEL
CUTTING CHOP SAW*
iMPEriAL METriC iMPEriAL
10A 2200W 10A
16A 1800W 16A
15A 1800W 15A
2.4 2.4 2.4
1450rpm 1450min 1450rpm
-1
62lb 28kg 62lb
iMPEriAL METriC iMPEriAL
1/2" 12mm 1/2"
4-3/4" 127mm 5"
3-1/8" 90mm 3-1/2"
3-3/4 x 7-1/8" 95 x 200mm 3-3/4 x 7-7/8"
3 x 4-3/8" 78 x 110mm 3 x 4-3/8"
5-1/8" 150mm 5-7/8"
4-1/8" 127mm 5"
4 x 8" 89 x 184mm 4 x 8"
3 x 4" 89 x 89mm 4 x 4"
5/16" 8mm 5/16"
iMPEriAL METriC iMPEriAL
14" 380mm 15"
1" 25mm 1"
66 70 70
.094" 1.7mm .094"
108 dB (A) K = 3 dB(A)
121 dB (A) K = 3 dB(A)
1.39 m/s K = 0.5 m/s
2 2 2
230V: 080-0007 110V: 080-0008
080-0004
080-0009
www.evolutionpowertools.com
(1.6) Note: The vibration measurement
was made under standard conditions in
accordance with: BS EN 61029-1:2009.
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
(1.7)

ViBrATiON

wArNiNg: When using this machine the
operator can be exposed to high levels of
vibration transmitted to the hand and arm.
It is possible that the operator could develop
"Vibration white finger disease" (Raynaud
syndrome). This condition can reduce the
sensitivity of the hand to temperature as
well as producing general numbness.
Prolonged or regular users of this machine
should monitor the condition of their hands
and fingers closely. If any of the symptoms
become evident, seek immediate
medical advice.
• The measurement and assessment of
human exposure to hand-transmitted
vibration in the workplace is given in:
BS EN ISO 5349-1:2001 and
BS EN ISO 5349-2:2002.
• Many factors can influence the actual
vibration level during operation e.g. the
work surfaces condition and orientation
and the type and condition of the machine
being used. Before each use, such factors
should be assessed, and where possible
appropriate working practices adopted.
Managing these factors can help reduce
the effects of vibration:
7
handling
• Handle the machine with care, allowing
the machine to do the work.
• Avoid using excessive physical effort on
any of the machine's controls.
• Consider your security and stability, and
the orientation of the machine during use.
work Surface
• Consider the work surface material;
its condition, density, strength,
rigidity and orientation.
wArNiNg: The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used.
The need to identify safety measures
and to protect the operator are based on
an estimation of exposure in the actual
conditions of use (taking account all parts
of the operating cycle, such as the times the
tool is switched off, when it is running idle,
in addition to trigger time).
(1.8)
LABELS & SyMBOLS
wArNiNg: Do not operate this machine
if warning and/or instruction labels are
missing or damaged. Contact Evolution
Power Tools for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
EN
ES
FR