Related Manuals for Evolution EVO230-HDX
Summary of Contents for Evolution EVO230-HDX
- Page 1 230mm (9”) TCT Steel Cutting Circular Saw Instruction Manual Read instructions before operating this tool. www.evolutionsteel.com...
-
Page 2: Ec Declaration Of Conformity
Longacre Close, Sheffield, S20 3FR as the supplier of the product listed below: the higher temperatures required by lead-free soldering. • The restricted substances and maximum allowed EVO230-HDX 230mm TCT Steel Cutting Circular Saw concentrations in homogenous materials are, by weight: Part Number EVO230X1/EVO230X2/EVO230X2EU... -
Page 3: General Safety Rules
2) Electrical Safety to Evolution Power Tools. This warranty is void if the tool a) Power tool plugs must match the outlet. Never modify the being returned has been used to cut materials beyond the plug in any way. - Page 4 When servicing a tool, use only genuine Evolution replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.
-
Page 5: Specific Safety Rules And Symbols
Do not operate machine if warning and / or instruction labels blade. Keep your second hand on auxiliary handle, or motor are missing or damaged. Contact evolution power tools for housing. If both hands are holding the saw, they cannot be replacement labels. -
Page 6: Further Safety Instructions For All Saws
FURTHER SAFETY INSTRUCTIONS FOR ALL SAWS SAFETY INSTRUCTIONS FOR SAWS Causes & Operator Prevention Of Kickback: a) Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and - kickback is a sudden reaction to a pinched, bound or close instantly. -
Page 7: Specifications
ASSEMBLY Adjustment Of The Cutting Depth Your Evolution Power Tools saw is shipped complete. Release the handle to adjust to the required cutting depth. Remove all contents from the box and inspect to ensure Ensure that the blade protrudes a maximum of 3/16” (4mm) through the material being cut. - Page 8 When using the parallel guide, ensure • Use only genuine EVOLUTION brand saw blades. that it is parallel with the blade and not the base of the tool, •...
-
Page 9: Maintenance
Check for wear and replace when they reach 1/4” (6mm). For all other service Aluminum 1.94 24.40 take machine to your local dealer, or to Evolution Power Cast Iron 0.00 Tools USA, Iowa, if bought in the USA. Iron Plate 3.61... - Page 10 EVO230-HDX CUTTING THROUGH 1/2” MILD STEEL PLATE www.evolutionsteel.com...
- Page 11 EVO230-HDX TRIGGER SWITCH EVO230-HDX FIGURE 1 EVO230-HDX TILTING BLADE EVO230-HDX FIGURE 2 EVO230-HDX 1750W MOTOR EVO230-HDX FIGURE 3 www.evolutionsteel.com...
Need help?
Do you have a question about the EVO230-HDX and is the answer not in the manual?
Questions and answers