Making The Group And Interlock Settings From An Me Remote Controller; Overview; Address Registration - Mitsubishi Electric PUHY-P200 Service Handbook

[6-3 Making the Group and Interlock Settings from an ME Remote Controller ]

6-3 Making the Group and Interlock Settings from an ME Remote
Controller
6-3-1

Overview

Make the following settings to perform a group operation of units that are connected to different outdoor units or to manually set up the
indoor/outdoor unit address.
(A) Group settings...........Registration of the indoor units to be controlled with the remote controller,
and search and deletion of registered information.
(B) Interlock settings........Registration of LOSSNAY units to be interlocked with the indoor units,
and search and deletion of registered information
6-3-2

Address Registration

Register the indoor unit to be controlled with the remote controller.
Bring up either the blinking display of HO by turning on the unit or the
1
normal display by pressing the ON/OFF button.
The display window must look like one of the two figures below to proceed to the
next step.
[Blinking display of HO ]
HWE14040
[Normal display]
- 115 -
CENTRALLY CONTROLLED 1Hr.
DAILY ON OFF ˚C
AUTO OFF
CLOCK
REMAINDER FILTER
CHECK MODE
TEST RUN
STAND BY ˚C
LIMIT TEMP.
NOT AVAILABLE
DEFROST
TEMP.
ON/OFF
C
CLOCK ON OFF
G
CHECK TEST
TIMER SET
PAR-F27MEA
E
H
B
F
?
FILTER
A
D
GB