Employee Identity Validation (Scanning A Login Bar Code And Entering A Pin) - Motorola CA50 Developer & User Manual

The device connects to the UCA server. On this screen, press the right soft key to Cancel the connection and
2.
to put the device into sleep mode.
Server Connection Screen
Figure 4-3
Upon successful login, the UCA client application can display a login prompt. The login prompt is server
3.
configurable (see Login Options on page
NOTE If the device cannot connect to the network or find the UCA server during the login attempt, an error
message displays, a beep sounds and a red LED blinks. A countdown error screen appears. When the
countdown is complete, an automatic retry is attempted. If the Log key is pressed from the countdown
screen, a Log screen displays with a log of the attempted network connection error. Automatic retry is
disabled while in the Log screen.
From the Log screen a user can press the right soft key to go Back: to the error screen and restart
automatic retry, or press right soft key to Cancel and put the device into sleep mode.

Employee Identity Validation (Scanning a Login Bar Code and entering a PIN)

For an employee to log in to the UCA server, scan an employee login bar code and optionally enter a PIN. For
additional details see page D-15
NOTE The Employee Identity Validation process is controlled by the UCA server application. For details see
page 5-1
When the device is logged off, a log in prompt screen displays.
1.
Scan bar code
to log in
Exit
Login Prompt
Figure 4-4
Press the Scan/Select key to scan the appropriate login bar code. Upon a successful login, a decode beep
2.
sounds and the green LED blinks.
If a PIN is required to continue, the PIN input screen displays.
3.
PIN Input
Figure 4-5
NOTE PIN entry can be used to enhance security and assist in employee identity validation. For a sample
implementation see
UCA client application version
4-22).
and E-14
.
.
page E-14
.
CA50 Modes of Operation 4 - 3