Motorola CA50 Developer & User Manual page 472

E - 6 CA50/UCA Client & Server Developer & User Guide
For step-by-step instructions on how to configure the WS2000 and its AP follow the steps below.
Connect the CAT 5 cable from the network port in the laptop to the WS2000 port 5 or 6, and provide power
1.
to the WS2000.
Connect the AP with a Cat 5 cable into WS2000 port 1.
2.
Open the web browser to http://192.168.0.1 to view the WS2000 Web Console.
3.
NOTE 1. To access the WS2000 Web Console, your PC must have Java for Windows - Internet Explorer ver. 1.4
or later. This is available at Java.com.
2. It is assumed you are configuring the WS2000 using the PC that hosts the UCA server. If not, make
sure the PC is set to DHCP by default.
IMPORTANT If, after loading the Java plug-in, your IE browser is unable to display
Login in to the WS2000 using the factory default username and password:
•
WS2000 Wireless Switch Login
Figure E-2
•
Enter the default User ID: admin
•
Enter the default Password: symbol
•
Click Login.
• When prompted to change the WS2000 password, change symbol to Symbol (change the 's' to upper
case 'S').
•
New Password: Symbol.
ActiveX control is enabled. Go to Tools > Internet Options > Security tab and select the Custom
Level button. Scroll down to ActiveX controls and plug-ins and enable the item Run ActiveX
Controls & Plug-ins.
Figure E-2
, make sure the