Listening To Music Via A2Dp; Music Sharing - Cardo Systems PACKTALK User Manual

6.3 LISTENING TO MUSIC VIA A2DP

ß
Play
ß
Pause/Stop
ß
Next Track
ß
Previous Track*
Music Scan
Stop Scan
*With some phones you may need to repeat this action
SWITCHING BETWEEN A2DP AUDIO SOURCES
If two A2DP audio sources are paired, the scala rider will use the default A2DP audio
source. To switch to the other audio source, stop the music playback from the current
device and start music playback on the other device. Your scala rider will automatically
remember your last played device.

6.4 MUSIC SHARING

Music Sharing allows rider and passenger to listen to the same music within
a range of 33 ft / 10m.
Music Sharing works only in Bluetooth Intercom mode and with A2DP
(Bluetooth stereo) enabled audio sources. To share your music with your riding partner,
your scala rider [SENDER] needs to be paired to the other unit [RECEIVER] on CHANNEL A
and the RECEIVER must be in Standby mode.
[SENDER]
Start/Stop sharing your music
[RECEIVER] Stop music sharing
Phone/Intercom calls and GPS audio navigation will override music playback.
Music Sharing does not transmit voice audio and cannot be used as an Intercom call.
(on A2DP/AVRCP compatible Bluetooth audio devices)
π
In standby, tap or use the Voice Command / Feature Menu
π
Press for 2 seconds or use Voice Command
π
With music ON, tap or use Voice Command
With music ON, double-tap
With music ON, tap and roll
The first few seconds of each audio track will be played.
To stop the scan on the current track, say any word loudly into the
π
microphone or tap
During A2DP music playback, press
v
Press
π
or use Voice Command
Z
forward (scans up) or back (scans down).
for 2 seconds
v
for 2 seconds
|
27