Cardo Systems Scala rider Q-Solo Manual

Q-solo
Manual
INDEX
I M P O R T A N T :
This is version 1.0 of the User
Manual. Please note, that our
manual is periodically updated
on the Cardo website to include
the ver y latest features and
functions of your new scala rider.

INTRODUCTION

1
Thank you for choosing the scala rider Q-solo Bluetooth® headset
for motorcycle helmets. This manual will help you set up, configure
and operate it.

CHARGING THE SCALA RIDER

Make sure that your scala rider is fully charged for at least 4 hours
2 before initial use.
Charging with a 5v wall charger is faster than charging with a
computer USB port.
• RED LED ON – Charging
• RED LED OFF – Charging complete
3.1 STATUS LIGHTS
None
The
3
GETTING
The
STARTED
The
The
Solid
™
1
INTRODUCTION
2
CHARGING THE SCALA RIDER
3

GETTING STARTED:

3.1
4
PAIRING AND USING A MOBILE PHONE, GPS DEVICE OR ANY MUSIC PLAYERS:
4.1 PAIRING BLUETOOTH ,
5
TROUBLESHOOTING
6
SUPPORT
BLUE LED flashes once every 3 seconds
BLUE LED flashes twice every 3 seconds
RED LED flashes once every 3 seconds
RED LED flashes twice every 3 seconds
RED
STATUS LIGHTS, 3.2 GENERAL FUNCTIONS,
4.2 MAKING AND RECEIVING PHONE CALLS,
The scala rider Q-solo is waterproof and dustproof. However,
when in use, the USB silicone cover should be kept tightly closed
to prevent moisture from entering the unit.
scala rider is OFF
Standby mode. No active audio sources
Active mode – Call in progress / music or other audio source is ON
Standby mode – Battery is low
Active mode – Battery is low
Charging
3.3 VOX ACTIVATION
4.3 LISTENING TO MUSIC VIA A2DP
1.
Power Button
2. LED Indicator
3.
Music / Mobile Button
4.
Volume Up
5.
Charging
6. Volume Down
scala rider Q-solo
®