Infocenter Display; Infocenter Display; Splash Screen - Toro Groundsmaster 4000-D Service Manual

InfoCenter Display

The InfoCenter Display used on your Groundsmaster is
a LCD device that is located on the console. The Info-
Center provides information for the machine operator
during machine operation, provides electrical system
diagnostic assistance for technicians and allows inputs
for adjustable machine settings.

Splash Screen

The two (2) InfoCenter splash screens (Figs. 8 and 9)
are displayed when the ignition switch is initially turned
to the RUN or START position. The splash screens allow
basic machine information to be reviewed by the operat-
or. After each of the splash screens has been on the In-
foCenter for several seconds, the main information
screen will be displayed on the InfoCenter.
The splash screens can be used to identify machine bat-
tery voltage, fuel level, hourmeter reading, hydraulic oil
temperature and engine status.
Electrical System
Power for the InfoCenter is available when energized by
the main power relay (ignition switch in the RUN or
START position). A CAN--bus system involving the ma-
chine TEC controllers, the Yanmar engine electronic
control unit and the InfoCenter is used to provide neces-
sary machine communication for InfoCenter operation.
1
6
1. Battery voltage
2. Fuel gauge
3. Hour meter
2
1
7
1. Battery voltage
2. Hydraulic oil temperature
3. Fuel gauge
4. Engine RPM
Page 5 - - 8
T
12.6V
95.2
5
Figure 8
4. Right button
5. Down button
6. Menu/back button
180
220
140
o F
12.6V
RPM
0
6
Figure 9
5. Right button
6. Down button
7. Menu/back button
Groundsmaster 4000--D/4010--D
2
3
4
3
4
5