Philips LTC 8100 Series Installation Instructions Manual page 58

Monitor Outputs
Pan/Tilt Zoom
Allegiant
and Satellite
Main CU Bay
Control Data
LTC 8568/00 Signal
Distribution Unit
To Any Local
Pan/Tilt/Zoom
Camera Sites
Up to 1.5 km (5000 ft)
Using 1 mm 18 AWG)
Shielded Twisted Pair
(Belden 8760 or Equivalent)
1 Line to Each Remote
Satellite System Location
Pan/Tilt/Zoom and
Satellite Control Data
Satellite
Data Line
Data Converter Units
To Any Local
Pan/Tilt/Zoom
Camera Sites
Local Pan/Tilt/Zoom
Control Data Line
TC8550 Series Keyboard Controls Any of the Local Cameras on
Any of the Local Monitors (Video and Pan/Tilt/Zoom)
Inputs Used for Both
Local and Trunk Lines
LTC 8550 Series Controls Any
Local or Remote Camera
On Any Local Monitor
(Video and Pan/Tilt/Zoom)
Monitor Outputs Used As Video
Trunk Lines to Main Control Site
Any Model
Allegiant
Main Bay
Console Port
Input
LTC 8780 Series
LTC 8569 Series
Code Merger Unit
Conceptual Diagram of Allegiant Satellite Switching System
LTC 8540/00 Series
Alarm Interface Unit
Local Camera
Video Inputs
Multiple Video Coax
Multiple Video Trunk Lines from
Each Remote Satellite Location
Video Trunk Lines from
Other Satellite Locations
LTC 8540/00 Series
Alarm Interface Unit
58
Alarm Inputs May Activate
Either Local or Satellite
Video on Main Control
Center's Monitor
Local Monitors
Alarm Inputs Activate
Ony Local Video on
Local Monitors
S932A11BE