Using The Wake-Up Timer; Snooze Mode - Sanyo RM-5090 Instruction Manual

USING THE WAKE-UP TIMER

1. If you want to wake up with the radio, tune in the station and adjust the volume level
first.
2. Set the wake-up time. (See "WAKE-UP TIME SETTING".)
3. Set the function switch to ALARM-RADIO or ALARM-BUZZER.
ALARM-RADIO: Wake up with the radio
ALARM-BUZZER: Wake up with the buzzer.
The ALARM indicator lights. The timer is set.
When the timer ON time arrives, the radio or buzzer will sound for approximately 1 hour and
59 minutes and then turn off automatically. The wake-up timer will function every day un-
less it is released.
To stop the radio or buzzer, push the ALARM button.
To release the timer, set the function switch to OFF.

SNOOZE MODE

During the wake-up timer is operating, press the SNOOZE button. The radio or buzzer
will stop for approximately 9 minutes but will start again and this will be repeated.
NOTES:
- If the SNOOZE button is not pressed, the radio or buzzer will sound for approxi-
mately 1 hour and 59 minutes and then turn off automatically.
- To cancel the snooze mode, push the ALARM button or set the function switch to
OFF.
6