Using The Wake-Up Timer; Snooze Mode - Sanyo RM-6090 Instruction Manual

NOTE:
- Do not set the ALARM switch to ALARM 1+2 when wake up time setting.
- If you want to check the time setting, simply push the ALARM button.

USING THE WAKE-UP TIMER

1. If you want to wake up with the radio, tune in the station and adjust the volume level
first.
2. Set the wake-up time. (See "WAKE-UP TIME SETTING".)
3. Set the FUNCTION switch to ALARM-RADIO or ALARM-BUZZER.
ALARM-RADIO: Wake up with the radio
ALARM-BUZZER: Wake up with the buzzer.
4. Set the ALARM switch to the appropriate position:
a) For ALARM 1 to sound, set the ALARM switch to ALARM 1. The ALARM 1 indica-
tor will be displayed.
b) For ALARM 2 to sound, set the ALARM switch to ALARM 2. The ALARM 2 indica-
tor will be displayed.
c) For both ALARM 1 and 2 to sound, set the ALARM switch to ALARM 1+2. The
ALARM 1 and 2 indicators will be displayed.
When the timer ON time arrives, the radio or buzzer will sound for approximately 59 min-
utes and then turn off automatically. The wake-up timer will function every day unless it is
released.
To release the timer, set the FUNCTION switch to OFF.

SNOOZE MODE

During the wake-up timer is operating, press the SNOOZE button. The radio or buzzer
will stop for approximately 7 minutes but will start again and this will be repeated.
NOTES:
- If the SNOOZE button is not pressed, the radio or buzzer will sound for approxi-
mately 59 minutes and then turn off automatically.
- To cancel the snooze mode, push the SLEEP button or set the FUNCTION switch to
OFF.
6