Canopy T1/E1 Multiplexer
3 MANAGING YOUR CANOPY T1/E1 MULTIPLEXERS
3.1 REMOTE MANAGEMENT THROUGH CONTROL PORT
The CONTROL port in the front panel (shown in
capability to remotely manage the Canopy T1/E1 Multiplexer. To do so requires an
Ethernet to
RS-232 converter. An example of such a converter is available at
http://www.precidia.com/products/product1.html.
The configuration for remote management is illustrated in
Canopy Ethernet
48-v DC
Supply
Lightning/
Surge
Protector
Power
over
Ethernet
Canopy
ODU
Issue 3
3.3-v
Wall
Mount
Supply
Canopy T1/E1 Multiplexer
Figure 20: Remote management overview
Page 53 of 73
T1/E1 Multiplexer FPGA Version 3.4
Figure 6
on Page 14) provides the
Figure
To
E1/T1 Lines
DB9
September 2004
20.
To
Ethernet
Network
Ethernet
Switch
Ethernet
to RS-232
Converter