Transmission Service; Transmission Disassembly And Inspection - Polaris RANGER RZR 170 Service Manual

TRANSMISSION SERVICE

Transmission Disassembly and Inspection

IMPORTANT: To ensure proper shifting, verify shift
cables are in good condition, routed and adjusted
properly after transmission is assembled and engine
is installed.
1. Remove drain plug (A) and drain oil from case.
2. Remove shift cable bracket (B) and shift arm screw
(C).
3. Mark shift shaft and shift cable arm orientation before
removing the arm.
4. Remove angle drive inspection / oil fill cover.
A
B
C
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
CVT / TRANSMISSION
NOTE: Angle drive removal is not required for
transmission cover removal or access to internal
transmission components. Drive pinion gear (D) and
shaft will stay with cover when removed.
D
5. Remove (3) angle drive output housing screws.
Remove housing.
6. Note number of shims for assembly.
7. Turn output shaft by hand to check for smooth rotation.
Push on splined end and gear end of shaft. There
7
7.13