Personalise Announce Message; Accept, Block Or Send Call - BT BT8600 Quick Setup And User Manual

Personalise your announce message
You can personalise the BT Call Guardian greeting, by adding your name to
the Announce message.
1. Select , scroll
Menu
2. Follow the instructions to set your PIN or enter your PIN and select
3.
BT Call Guardian
4. Scroll to
Announce msg
5. Press , or
Select
6. If you are happy with your recording, press
How do you accept, block or send a call to the answer phone?
1. BT Call Guardian answers a call for you and asks the caller to say ("announce")
who they are.
2. Your BT8600 then rings you with the Announced call on the display and
announces the caller's name when you pick up the phone. (e.g. "You have a
call from Mark").
3. You now have the following choices :
• To accept the call, press 1
• To always accept their calls, press 2
• To block their calls, press 3 or press
• To send this call to the answer phone, press 4
• Or to ignore the call, just hang up (this call will then be sent straight to the
answer phone)
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
to
Call Control
is highlighted, press
, press
Select
, on
Record name
and press
Select
or .
Select
or .
and follow the voice prompt and press Save.
.
BT Call Guardian
or .
.
OK
19