Download
Share
Print this page
Cub Cadet 7000 Series Service Manual
  1. Manuals
  2. Brands
  3. Cub Cadet Manuals
  4. Tractor
  5. Domestic Series 7000
  6. Service manual
Cub Cadet 7000 Series Service Manual

Cub Cadet 7000 Series Service Manual

Hide thumbs Also See for 7000 Series:

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
Cub Cadet 7000 (Domestic) Compact Tractor
NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals.
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperienced
individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all instructions
This Service Manual is not a substitute for the Operator's Manual. You must read, understand
and common sense when working on power equipment. This includes the contents of the product's Operators Manual, supplied
and follow all of the directions in this manual as well as the Operator's Manual before working
with the equipment. No liability can be accepted for any inaccuracies or omission in this publication, although care has been
on this power equipment.
taken to make it as complete and accurate as possible at the time of publication. However, due to the variety of outdoor power
equipment and continuing product changes that occur over time, updates will be made to these instructions from time to time.
Therefore, it may be necessary to obtain the latest materials before servicing or repairing a product. The company reserves the
right to make changes at any time to this publication without prior notice and without incurring an obligation to make such
CUB CADET LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019
changes to previously published versions. Instructions, photographs and illustrations used in this publication are for reference
use only and may not depict actual model and component parts. © Copyright 2005 MTD Products Inc. All Rights Reserved
MTD Products LLC - Product Training and Education Department
PRINTED IN USA
Service Manual
FORM NO.769-00969
(11/2003)

Advertisement

loading

Related Manuals for Cub Cadet 7000 Series

Summary of Contents for Cub Cadet 7000 Series

  • Page 1 CUB CADET LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019 changes to previously published versions. Instructions, photographs and illustrations used in this publication are for reference use only and may not depict actual model and component parts.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Description ......................1 Preparation......................1 Removal of old Shifter ..................2 Assembly......................4 Installation of Shift Lock Plate ................7 Installation of new Detent Spring ............... 7 Checking Height Adjustment of 3 Point Hitch............ 8...

  • Page 5: Description

    / Neutral / Low range gear selector on first year produc- kit. They have different compression ratings. tion Low Boy 7000 series tractors. The kit includes: Use the spring that is harder to compress. It will be visually identified by the heavier guage wire...

  • Page 6: Removal Of Old Shifter

    7000 High / Low Shift Kit REMOVAL OF OLD SHIFTER 3.4. Working from beneath the tractor, remove the hairpin clip and flat washer that hold the lower 3.1. Place the High / Neutral / Low gear selector in end of the connecting rod to the shift assembly. the Low position.
  • Page 7 7000 High / Low Shift Kit 3.8. Remove the spring pin that holds the shift pin 3.12. Remove the control handle and control handle assembly to the shaft that enters the transmis- bracket from the tractor. sion using a flat-nosed drift and a heavy ham- 3.13.

  • Page 8: Assembly

    7000 High / Low Shift Kit ASSEMBLY 4.4. Connect the steel hydraulic lines to the flare fit- tings on top of the hydraulic pump, and snug the 4.1. Install the plastic flange bearings in each end of flare nuts gently. the tube on the new valve mounting bracket.
  • Page 9 7000 High / Low Shift Kit 4.12. Apply anti-seize compound to the inside of the 4.18. Connect the clevis to the shift pin. It is not nec- tube portion of the shift pin assembly. Slip the essary to secure it with a hairpin clip at this shift pin assembly onto the shift shaft with the point.
  • Page 10 7000 High / Low Shift Kit 4.21. Once it is confirmed that positive detent is 4.23. Install the connecting rod in the tractor, and achieved, hold the shift handle in the Low posi- secure it with the new hairpin clips provided in tion, and check the adjustment of the connecting the kit.

  • Page 11: Installation Of Shift Lock Plate

    7000 High / Low Shift Kit INSTALL THE SHIFT LOCK PLATE 5.5. With the counter-sunk side of the shift lock plate facing up, attach it to the fender console using 5.1. With the gear selector in Low, position the shift the flat-head screw, washer, and locking nut pro- lock plate as follows: See Figure 5.1.

  • Page 12: Checking Height Adjustment Of 3 Point Hitch

    7000 High / Low Shift Kit 5.9. Apply the shift position indicator label to the shift 6.3. Insert the new detent spring in place of the origi- lock plate. See Figure 5.9. nal one. See Figure 6.3. Figure 5.9 Figure 6.3 INSTALL THE NEW DETENT SPRING 6.4.
  • Page 13 7000 High / Low Shift Kit • Height for the two wheeled drive unit should be 28-30” • Height for the four wheeled drive unit should be 29 1/2” - 31 1/2” 7.2. Adjust feedback arm accordingly NOTE: Feedback arm is on the right side of the right upper hitch arm.