Water Hardness Level Adjustment Table - Blomberg LDVN2284 Instruction Manual

Preparation
Test Strip
a
b
Remove the Let the water
test strip from flow from your
its packing. tap for 1 minute.
To Adjust the Water Hardness
1. After turning on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the
supply water. See "Water hardness level adjustment table" for correct setting.
4. Press On / Off key to save the setting.

Water Hardness Level Adjustment Table

English German
Hardness Water Water
Level Hardness Hardness
°dE
1 Level
st
0-5
2 Level
nd
6-9
3 Level
rd
10-15
4 Level
th
16-19 13-15
5 Level
th
20-24 16-19
6 Level
th
25-62 20-50
If the hardness level of the water that you use is above 90°dF (French standard for water
hardness) or if you are using well water, than it is recommended to use filter and water
purification devices.
* If the hardness level of the water that you use is below 8°dF (French standard for
water hardness), there is no need to use salt in your dishwasher. If this is the case, Salt
Indicator (if any) illuminates continuously on the panel of your machine.
If the water hardness is set to level 1, the Salt Indicator will illuminate continuously
although it is not necessary to use salt. If you use salt under this condition, salt will not
be consumed and the lamp will not illuminate.
/39 EN
14
c
d
1 second
Take the test strip
Fill a glass with
out of the water and
tap water and
dip the test strip shake it.
into water for 1
second.
French
Water
Water Hardness Level Indicator
Hardness
°dH °dF*
0-4 0-8
Press the Time Delay key to switch the water hardness level to position 1.
5-7 9-13
8-12 14-22 Press the Time Delay key to switch the water hardness level to position 2.
23-27 Press the Time Delay key to switch the water hardness level to position 3.
28-34 Press the Time Delay key to switch the water hardness level to position 4.
35-90 Press the Time Delay key to switch the water hardness level to position 5.
e
f
Level 1
Level 2
Level 3
Level 4
1 minute
Level 5
Level 6
Hold for Set the water hardness level of your dishwasher
1 minute.
according to the result shown by the test strip.
Dishwasher / Instruction Manual
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content