Massaging - Sanyo HEC-DR5700 Instruction Manual

MASSAGING (AUTOMATIC COURSES)
1
Press the OPERATION ON/OFF button.
When the button is pressed, the lamps of the sole warmer
●
and remote control will illuminate, and the sole warmer
will turn on.
When the foot rest is fully lowered, the foot rest will rise a little.
●
When the massaging rollers are not located in the upper
●
section, the massaging rollers will move to the upper
section and stop. (During the movement, the icon of
"ORIGIN" on the remote control flickers.)
2
Turn the sole warmer on or off.
Sole warmer will be turned on or off each time
●
the SOLE WARMER button is pressed. (The button is
illuminated while the sole warmer is on.)
If you feel that the sole warmer is too hot, turn it off
●
by pressing the SOLE WARMER button.
＊When the room temperature is low such as in winter, it
takes some time to warm up or you may barely feel warm.
3
Adjust the positions of the back rest and the foot rest.
4
Press the desired Automatic Course button.
NECK & SHOULDER
Massages mainly
the neck and
shoulders.
LOWER BODY can be operated simultaneously with NECK & SHOULDER or LOWER BACK.
●
COMFORT AIR COURSE cannot be operated simultaneously with any other courses.
●
Refer to the page 28 regarding the massaging contents of Automatic Courses.
●
Change of course during massaging, or change to the Whole Body Sensor Automatic Courses or the
●
Manual Courses, is possible.
5
Massaging will start automatically.
Measure the position of shoulder.
①
Check if the position of shoulder is correct. If not, adjust the position using the POSITION ADJUST buttons.
●
(The POSITION ADJUST buttons can also be used while massaging is in progress.) (See page 19)
Starts the massaging of selected course.
②
6
Adjust the strength of massage.
Finishes massaging automatically by timer operation.
■
The massaging rollers are moved to the upper position and are stopped automatically approx. 15 minutes
●
after starting the operation. The beep sounds and the lamp on the remote control will turn off.
To stop the massage during operation.
Press the OPERATION ON/OFF button.
All the massaging will stop.
●
(The massaging rollers are moved to the
upper position and remain in that position.)
Press the button for the current operation.
The massaging that corresponds to the
●
pressed button will stop. (The Massaging
rollers will stop at that point.)
LOWER BACK
Massages mainly Air massage mainly
the waist and lower on the legs and
back. soles of the feet.
If you have felt abnormal physical sensation or want to stop the massager immediately
Press the INSTANT STOP button.
All the massaging will stop and the lamp of the remote
●
When you want to restart massaging, press the
●
４
１
LOWER BODY COMFORT AIR COURSE
Air massage mainly
on the waist and
legs.
(See page 19)
control will turn off.
OPERATION ON/OFF button. (The massaging rollers
move to the upper position and remain in that
position.)
After the movement, repeat the operation to begin a
massage.
６
２
５
３
(See page 12 - 14)
18