Sanyo HEC-DR5700 Instruction Manual page 16

MASSAGING (WHOLE BODY SENSOR AUTOMATIC COURSES)
1
Press the OPERATION ON/OFF button.
When the button is pressed, the lamps of the sole warmer and remote
●
control will illuminate, and the sole warmer will turn on.
When the foot rest is fully lowered, the foot rest will rise a little.
●
When the massaging rollers are not located in the upper section, the
●
massaging rollers will move to the upper section and stop.
(During the movement, the icon of "ORIGIN" on the remote control
flickers.)
2
Turn the sole warmer on or off.
Sole warmer will be turned on or off each time the SOLE WARMER button is pressed. (The button is
●
illuminated while the sole warmer is on.)
If you feel that the sole warmer is too hot, turn it off by pressing the SOLE WARMER button.
●
＊When the room temperature is low such as in winter, it takes some time to warm up or you may barely
feel heat.
3
Adjust the positions of the back rest and the foot rest.
4
Press the desired Whole Body Sensor Automatic Course button.
RECOVERY
Tapping massage to ease
muscle fatigue
REFRESH
Massages concentrating on
tapping, kneading and drum
roll which is designed to
promote blood circulation.
Refer to the page 27 and 28 regarding the contents of Whole Body Sensor Automatic Courses.
●
Change of course during massaging, or change to the Automatic Course or the Manual Courses, is possible.
●
5
Grip the sensor while touching with
your fingers (hand) at two sensor
points.
NOTE
Be sure to place your fingers (hand) on the sensor. The degree of stiffness cannot be measured if your
●
fingers (hand) are not placed on the sensor. (If your fingers (hand) are not gripping the sensor, "Grip the
sensor" on the remote control will be illuminated.) If your fingers (hand) are not touching the sensor
points, massages will be carried out according to the standard operation of the selected course.
When the user's skin is dry, the degree of stiffness may not be measured correctly. In such a case, slightly
●
moisten the fingers (hand) using hand cream and place the fingers (hand) on the sensor again.
15
RELAX
Kneading massage
to relax the whole
body
FINE
Massages the whole
body gently (reduced
time course)
Sensor controller
Press
(See page 12 - 14)
Underside of sensor
Sensors