Attaching The Stand - Sharp LC-32HT3U Service Manual

LC-32HT3U/LC-37HT3U/LC-42HT3U
Preparation

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
LC-32HT3U/37HT3U
rm that there are 9 screws (all the same
1
size) supplied with the TV.
Set the post for the stand unit onto the
2
box.
Attach the base to the post.
Insert and tighten the 5 screws into the 5
holes on the bottom of the base.
Hex key
Screw
Insert the stand into the openings on the
3
bottom of the TV.
Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
NOTE
• To detach the stand, perform the steps in reverse order.
1 – 7
Hex key
Screw
Soft cushion