Continuous Drainage - Mitsubishi Electric MJ-E152AF-H Instruction Manual

Continuous Drainage

If a drain is available, the unit can continuously drain water by attaching a commercially available hose (with an
internal diameter of 15 mm) to the drain.
The unit can be operated for a long period of time without the need to empty the water tank.
Long enough to reach the drain.
1
2
Use pincers to cut the three
fixing ribs, taking care not to
let them fall into the unit.
3
Make sure the hose is in good condition free of bends
and cracks.
If it is hard to insert the hose, put it in water and then
insert it. Do not use oils or lubricants.
Inspect the hose once every 2 weeks.
(Insects or dirt deposits in the hose may cause leakage.)
Hose is immersed
in water.
Hose is higher than
the drainage outlet.
Water will not be
drained.
Remove the water tank.
221mm
114mm
Drain
Stopper
Push here.
CAUTION
Water inside the hose may freeze and water may leak
from the unit and damage surrounding objects.
Foreign objects or dirt could clog the hose, resulting in
overheating and/or leakage.
4
Feed the commercially available hose (ID 15 mm)
(into the continuous drainage outlet of the unit.)
Confirm that the hose is
securely attached and
does not leak.
Confirm that the hose
does not show signs of
deterioration such as
cracks or bends.
5
If the tank is not reattached, the FULL lamp
remains on and operation is not possible.
Hose