Reducing Growth Of Mildew In Bathroom - Mitsubishi Electric MJ-E152AF-H Instruction Manual

Reducing Growth of Mildew in Bathroom

In this mode, the unit can dehumidify the bathroom to remove residual moisture and water drops, thus suppressing
the mildew growth as a means of mildew prevention.
The unit is not designed to be droplet-proof The unit is not designed to be droplet-proof
or waterproof and could cause electric shock or waterproof and could cause electric shock
and/or fire if water enters the unit. and/or fire if water enters the unit.
For better results, do not turn on the room ventilation
fan or open the window or door when the unit is
operating.
The results may vary depending on the size, floor
and wall materials of the bathroom.
There may be some residual water drops in the
places that can collect water.
Mildew growth may still occur due to the fungus type
and conditions of the room.
<e.g.> Under the containers of the bathroom, deeper
inside of closets and behind furniture and
places with bad air flow.
Places such as inside of the bathtub, under
containers or where the blowing air cannot reach,
cannot be dried.
This mode does not remove existing mildew, scales
and sticky liquids around the sinkhole.
When it is used with the OFF TIMER mode, the unit
may stop operating before completing the drying
operation.
Mildew is unable to produce new spores if it is dried as mycelia. This principle is applied to the
MILDEW GUARD function. (However, the spores have high resistance to dryness.)
Adjust the unit so that the Adjust the unit so that the
blowing air can be delivered blowing air can be delivered
to every corner. to every corner.
Cover the unit if there is still Cover the unit if there is still
some water in the bathtub. some water in the bathtub.
1
2
(Blowing air from "downward air outlet")
POWER lamp turns off, and then the
operating mode indicator goes out.
In order to dry the bathroom floor, the unit will send air from
the "downward air outlet" automatically. To dry the wall and
ceiling etc., you may change the swing direction.
When choosing the swing settings except for "Downward"
setting, please adjust the orientation of the unit first.
As this mode will have automatic air flow control, it
is impossible to set the airflow and use it with other
operating modes or humidity setting.
Humidity 50% Humidity 50%
Operation time Operation time Varies depending on Varies depending on
temperature and humidity. temperature and humidity.
Swing direction Swing direction
Begin to operate Begin to operate
(MILDEW GUARD)
Blip
Blip Blip
Blip Blip
Blip Blip
4 hours 4 hours
Blow downwards Blow downwards
Stop operating Stop operating
"Research of Black Mold"
Research paper by Dr. K. Abe of
Environmental Biology Research
Center
Blip Blip
Blip Blip
Blip Blip