Fujitsu BS2000 SE700 User Manual page 33

Power-on, starting up BS2000, shutdown
To load BS2000, enter
Ê
LOAD FRAME: DETAIL-1 frame will appear.
You can start execution of IPL with the entries in this frame.
The frame shows, among other things, the (current and preset) load device (also called
IPL or boot load device) of BS2000. As the Server Unit was rebooted, the IPL load
device from the auto IPL configuration is set. This can differ from the IPL load device of
the last IPL. If necessary, select a different load device under
I
Take note of the setting for
set. In VM2000 mode,
In Native BS2000 mode, a blank must be entered there.
In VM2000 mode, switch to the PROGRAM LOAD FRAME: DETAIL-2 if necessary
Ê
using [PF9] in order to check the settings for loading the VM2000 firmware.
In VM2000 mode,
For
Ê
key.
U41857-J-Z125-1-76
FUNCTION ==> ld
Initial startup from the IPL load device requires a DIALOG startup.
FUNCTION ==> 3
PARMS ==> 1
VM MODE ==> 2
LOAD FUNCTION ==>
and press the Enter key. The PROGRAM
must be selected for this purpose.
. This depends on the BS2000 operating mode
PARMS ==>
must be set.
must be set there.
select one of the functions
Starting up BS2000 (SU /390)
IPL-DEVICE
or and press the Enter
LOAD START
.
LOAD
33