Starting Up Bs2000 (Su /390) - Fujitsu BS2000 SE700 User Manual

Starting up BS2000 (SU /390)

Powering on further units
For BS2000 operation on an SU /390m the following units should also be powered on:
In the case of MU redundancy the second MU should also be powered on. Only in this
●
way will it remain possible to continue operating the SVP of the SU /390 if the first MU
crashes. The SE Manager on the second MU will also remain available.
To enable the BS2000 systems to communicate over the IP network and ensure access
●
to Net-Storage is possible, the HNC must be powered on. Redundant existing HNCs
should also be powered on.
3.4 Starting up BS2000 (SU /390)
A Server Unit /390 is operated via the SVP (Service Processor) after it has been powered
on.
SVP functions are operated under menu guidance on the SVP console using SVP frames.
i
The SVP console is accessed via the SE Manager:
Select Systems → <unit>(SU</390>), BS2000 operation mode tab.
Ê
In the SVP console group click Open.
Ê
i
30
Some important SVP functions, for instance for IPL or IORSF, are also available
directly on the SE Manager or can alternatively be called in the KVP menu of the
BS2000 console, see the "Operation and Administration" manual [5].
If the browser now displays a warning about the security certificate, click
Continue to this website.
Power-on, starting up BS2000, shutdown
U41857-J-Z125-1-76