Rear Final Gear Oil - Honda PIONEER SXS700 Owner's Manual

Table of Contents

Advertisement

14 SXS700-31HL36000.book 125 ページ 2013年5月14日 火曜日 午前10時59分
Oil Recommendation
API classification
type
viscosity (weight)
suggested oil
Checking Oil
Refer to Safety Precautions on page 91.
Check the rear final gear oil level every 1,800 miles (3,000 km) or
300 hours of operating your Honda SXS, and add if needed.
1. Park your Honda SXS on a firm, level surface.
2. Remove the oil fill cap.
3. Make sure the oil level is at the lower edge of the oil fill inspection
hole.
4. Apply a thin coat of grease to a new O-ring, and insert it into the
oil fill cap groove.
5. Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
RIGHT REAR
oil fill cap
O-ring
oil fill cap

Rear Final Gear Oil

GL-4 or GL-5 except oils labeled as
energy conserving on the circular
API service label
hypoid gear oil
SAE 80
Honda shaft drive oil or equivalent
lower edge of oil
fill inspection hole
Servicing Your Honda
125

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PIONEER SXS700 and is the answer not in the manual?

Questions and answers

tracy leech
March 17, 2025

I need a clutch pack and not sure where i can get one from

User image 67d882b2e5d03

Table of Contents

Save PDF