Sending Messages To A Remote Subscriber - NEC univerge um8000 User Manual

Sending Messages to a Remote Subscriber

UNIVERGE UM8000 U
SER
Messages can be sent to subscribers who use a messaging system at another location. When addressing a
message to a subscriber at a remote site, you must identify the location as well as the subscriber. Remote
subscribers are subscribers who use a different messaging system server that is connected using a wide-area
network.
NOTE
This feature is only available if your organization has purchased a remote site
license.
Your system manager can provide location names or numbers you should use.
U P
SING A HONE
To send a message to a subscriber at another location
1
Call the messaging system and log on.
2
5
Press to leave a message.
3
Use the phone keys to find the subscriber.
Depending on how your system works with the other location, use the phone keys to spell the location
name, then the subscriber's extension OR use the phone keys to spell the subscriber's name.
The system lists the names that match the search criteria entered.
1
• Press when you hear the name of the subscriber.
2
• Press to hear the next matching name.
4
Record your message after the beep. The message must be at least three seconds long to be delivered.
#
Press to start recording the message again, or press
5
Follow the system prompts to edit the message, set special delivery options, or address the message to
others.
6
*
Press to send the message.
G
UIDE
*
to stop recording the message.
S M
ENDING ESSAGES
— 43