System Info - Sharp SL-5600 Operation Manual

160 Settings

System Info

This application presents a set of information each presenting a different aspect of
the system's state.
1.
On the Settings Home screen, tap the "System Info" application icon.
The System Information screen will appear.
Memory tab
Storage tab
Version tab
2.
Tap the desired tab.
3.
Tap to close the application.
Note:
• In the Memory tab, the memory indicator may vary depending on the status
before the unit is turned off, and when the unit is turned off and then turned
back on. This is because the memory counts the memory size used for internal
purposes as well.
• The Internal Flash memory holds the compressed data, files and additional
software. If they are to be transferred to the memory cards or a PC, they are
expanded to the original size.
Memory Full Errors
If the memory is almost full, the unit may not function properly and display errors may
appear in the instances listed below.
Should such errors occur, close any applications currently open or delete files no
longer required, particularly large-volume files, such as music, video and image files
according to the message that appears.
Errors that can be caused by lack of memory:
• You are unable to create a new entry, delete an existing entry, or transmit (as a
result of lack of memory).
• You are unable to copy or paste.
• You cannot delete Address Book, Calendar or Todo List entries, etc.
Shows memory usage for the system and application software.
Shows storage usage.
Shows Internal Flash memory usage.
If a memory card is inserted into the unit, the memory card
information will be added on the screen.
The added application software installed will increase the used
space.
Provides information on the system's software.