Settings; Add/Remove Software - Sharp SL-5600 Operation Manual

Settings

Add/Remove Software

In addition to the application software that has been pre-installed on the SL-5600,
you can install additional applications (Linux/Qt/Java) which have been downloaded
from the Internet, etc. to the SL-5600. To install software to the SL-5600, copy the
desired software packages (.ipk) to the SL-5600 and then install them using the
Add/Remove Software application.
Software packages can be found on the following:
• Our Web site: http://myzaurus.com
• CD-ROM supplied
Digital camera software, Expert software, etc. are included.
Note:
• Software packages must be ipk format (*.ipk).
• If the installed software does not launch, tap and hold the installed application
icon for a few moments, then turn on the "Execute with root privilege (not
secure)" checkbox on its Detail screen. The root privilege is executed, but the
security is not guaranteed.
• After additional software is installed using a software package (*ipk), the
package will remain in the Internal Flash memory or memory cards. Deleting
this package will increase the Internal Flash memory space. (Even if the
software package (*ipk) is deleted, the installed software will operate
properly.)
Copying the software package to be installed
Use one of the following methods to copy the desired software package (*.ipk) to the
SL-5600.
Using the Opera Browser application
Establish a connection to the Internet and launch the Opera Browser. Access
any web site from which you can download software packages, such as:
http://myzaurus.com (or others). Tap the package to start downloading. For
details on how to use the Opera Browser application, see page 66.
Settings 131