Beam Receive - Sharp SL-5600 Operation Manual

Beam Receive

You can transfer a single entry created in the Address Book, Calendar, or Todo List
applications, or an image file, etc. using the IR port (IrDA) on the left side of the unit.
This section describes how to transfer data between the same models. The SL-5600
can transfer data with SL-5500.
Setting
Be sure the IR ports are facing each other and are within 8 inches (approximately
20 cm) of each other when transferring data by infrared beam.
Note: Avoid using mobile phones near the SL-5600 or exposing the SL-5600
to strong light, such as direct sunlight, during transmission. Otherwise
transmission errors may occur, causing parts of the transmitted data to
be altered or deleted.
Not more than 8 inches
(approximately 20 cm)
Settings 145