Angelcare AC701 Owner's Manual
  1. Manuals
  2. Brands
  3. Angelcare Manuals
  4. Baby Monitor
  5. AC701
  6. Owner's manual

Angelcare AC701 Owner's Manual

Digital touchscreen movement & sound baby monitor
Hide thumbs Also See for AC701:

Advertisement

Table of Contents

See also: Owner's Manual
OWNER'S MANUAL
DIGITAL TOUCHSCREEN MOVEMENT
& SOUND BABY MONITOR
Model AC701
IMPORTANT ADVICE FOR INITIAL SETUP
Movement Alarm
Your monitor comes with the movement alarm activated.
When switching on your monitor it will alarm, with or without
the Sensor Pad plugged in, if no movement is detected.
Deactivate the movement function to use the monitor without
the Sensor Pad.
Batteries
Insert the enclosed rechargeable batteries into the Parent
Unit. If inserted incorrectly the Parent Unit will not charge
when placed in the charging cradle. The battery icon will flash
briefly on the Parent Unit screen to indicate charging.
Cord Safety
Ensure the Nursery Unit is at least 1 metre away from your
baby's cot. The Sensor Pad cord must always be kept out of
reach of baby and secured using the cord cover kit provided.
PLEASE FOLLOW THE INSTRUCTIONS CAREFULLY FOR CORRECT SETUP
Please DO NOT return this product to the store. For assistance please
contact our helpline on 0345 009 1789 or email helpline@babyhelpline.co.uk
Mon – Fri 10am – 4pm, excluding bank holidays.
FOR YOUR PEACE OF MIND

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC701 and is the answer not in the manual?

Questions and answers

Related Manuals for Angelcare AC701

Summary of Contents for Angelcare AC701

  • Page 1 FOR YOUR PEACE OF MIND OWNER’S MANUAL DIGITAL TOUCHSCREEN MOVEMENT & SOUND BABY MONITOR Model AC701 IMPORTANT ADVICE FOR INITIAL SETUP Movement Alarm Your monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected.

  • Page 2: Table Of Contents

    Insert batteries with correct polarity. DO NOT short-circuit supply This Angelcare Monitor is a Personal Care Product. Please DO NOT return this to the store 7. DO NOT use monitor near water (such terminals. ONLY use the recommended where you purchased it from.
  • Page 3 Use ONLY with a cart, stand, vicinity of overhead power lines or other measuring at least 33 x 33 cm and 6 mm tripod, bracket or table recommended by thick. Only use your Angelcare monitor electric light or power circuit, or where it ®...

  • Page 4: Warnings

    16. IMPORTANT SAFETY INSTRUCTIONS WARNING RELATED TO USE OF BATTERIES (North America Only) 16.1 Use O N LY the t ype and size of 16.9 DO NOT attempt to recharge batteries batteries specified in the owner’s manual. 17. Modifications not authorized by the 17.3 This d evice co m plies with pa r t provided with or identified for use with There is a risk of explosion if batteries are...

  • Page 5: Step 1 - Charging The Parent Unit (15 Hours)

    1) Slide the button to unlock and open the Rechargeable Charging Cradle 1 Sensor Pad (AC701) or 2 Sensor Pads (AC701-2SP) battery cover. Insert the Rechargeable Parent Unit with pre-installed cord covers Batteries (included) as per picture.

  • Page 6: Step 2 - Installing The Sensor Pad

    STEP 2 - INSTALLING THE SENSOR PAD 2.2 SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS RECOMMENDED 1) Use the crib leg by the wall closest to Cord covers 1, 2, 3, 4: the Nursery Unit (Fig 1). In cases where Position on floor the Nursery Unit is across the room, use Cord cover 4:...

  • Page 7: Step 3 - Setting Up The Nursery Unit

    STEP 3 - SETTING UP THE NURSERY UNIT 8 cm 1) Unscrew the battery cover and insert 2 AA Alkaline Batteries (not included). 6) Place the 6 cord cover approximately 2) Place the Nursery Unit at a minimum 8 cm from the edge of the mattress of 1 m away from the crib.

  • Page 8: Step 4 - Turning On Your Monitor

    STEP 4 - TURNING ON YOUR MONITOR STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR The Angelcare ® monitor can be used with the pre-program factory settings 1) Press the Parent Unit ON/OFF button or you can also customize your settings to your preference.
  • Page 9 TO STOP THE ALARM 5.2 - SOUND Level 0 TO ADJUST THE SOUND: Press any key on Press Nursery Unit’s Hold button the Parent Unit Level 1 Raise volume Press + or - buttons to adjust (see step 6.5) to put on Hold level (+) the volume level.

  • Page 10: Step 6 - Activating And Deactivating Additional Functions

    YOU ARE NOW READY STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS TO USE YOUR MONITOR MULTIFUNCTIONAL The Angelcare ® monitor is multifunctional. It can be use in different combinations The Angelcare monitor can be used with the pre-program factory settings ®...
  • Page 11 6.2 - ECO MODE 6.1 - VOICE ACTIVATION (VOX) OR CONTINUOUS SOUND MODE Allows you to reduce the electro-smog and save battery life. Allows you to select your option on how you monitor sound: VOX (voice activation picks up sound based on the selected sensitivity level settings) or TO ACTIVATE ECO MODE: Continuous (sound monitoring is continuously on, picking up all sounds).
  • Page 12 6.5 - HOLD 5) Low Temperature (SNOWFLAKE) icon will blink, press (+) or (-) to set low Allows you to put your Angelcare Monitor on HOLD. temperature alarm (5 to 19 °C). 1) Press the Setting icon to access 6) Press the Return icon to confirm the setting mode.

  • Page 13: Troubleshooting

    6.6 - MUTE TROUBLESHOOTING Allows you to activate the MUTE function. TAKING CARE OF YOUR RECHARGEABLE BATTERIES TO ACTIVATE MUTE: Press the Sound Icon. • Ensure that you fully charge your batteries for 15 hours before their first use. • To maintain maximum battery life it is recommended that you fully discharge TO DEACTIVATE MUTE: your batteries periodically.

  • Page 14: Limited Warranty

    ® from outside the crib. TOUCHSCREEN MOVEMENT & SOUND MONITOR (model AC701) is free from any material • You may need to decrease the sensitivity, refer to step 5.1. and workmanship defects, for a period of one (1) year (Rechargeable batteries not included) from the date of the original purchase.

  • Page 15: Technical Specifications

    Caution: To reduce the risk of electric among countries). shock, do not expose this product to rain or moisture. Hereby, Angelcare Monitors Inc, declares this baby monitor is in compliance with the Risk of explosion if battery is replaced by essential requirements and other relevant an incorrect type.
  • Page 17 This Angelcare Baby Monitor is a Personal Care Product. Please DO NOT return this to the store, but contact us initially for advice and assistance: Angelcare Helpline on 0345 009 1789 Website: www.angelcare.co.uk Email: helpline@babyhelpline.co.uk NOTE: Helpline is open Monday to Friday, 10am to 4pm, excluding bank holidays.

Table of Contents

Save PDF