To Dismantle The Oven Door - Miele H 4210 Operating And Installation Instructions

Cleaning and care

To dismantle the oven door

The oven door has seals on all sides to
protect it.
If, however, soiling has built up on the
inside surfaces of the glass panes, the
door can be dismantled in order to
clean in between the panes.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
Ensure that the glass panes are
inserted the correct way round after
cleaning as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
Take care not to break the panes.
46
Always remove the oven door before
dismantling it.
^ Place the door on a protective
surface (e.g. on a towel) to prevent it
getting scratched. The door handle
should line up with the edge of the
table. Make sure the glass lies flat
and does not get broken during
cleaning.
^ Unscrew the Torx screws, and
remove the guides, trim and seal.