Panasonic DBS 824 Manual page 263

Dial Tone (DT) Detection Timer
Software Version
Address FFl 3# 28# (O-255)44
Description
Use this program to set the amount of time (in milliseconds) the DBS 824 will
wait to detect a dial tone from the CO, before automatically redialing an
outgoing call If a dial tone is not detected within this amount of time auto-
repeat dialing will not be carried out.
Programming
I
Table I-31 DT detection timer values
Related Programming
Auto-Repeat Dialing
Wait Timer For Auto-Repeat Dialing FFl 3# 26#
Busy Tone (BT) Detection Timer FFl 3# 27# (0- 15)#
CO Busy Tone (BT) Detection for Auto-Repeat Dialing FF2 (Trunk)# 22#
Issued 3/l /95
CPC-S and CPC-M, Version 1 0 and higher
Number
0 1200
2
I 120 ms
4 24
160 ms
1,000 ms
25
26 1,040 ms
27 255 1,080 ms
Count
DBS 824-l O-400
Dial Tone (DT) Detection Timer
Timer Setting
see the following table for values)
Value (in milliseconds)
ms
960 ms (increments of 40 ms)
1
(or second)
10,200 ms (or 10 2 seconds)
1-115