Automatic Pause Position For Pbx Access Codes - Panasonic DBS 824 Manual

Hide thumbs Also See for DBS 824:

Table of Contents

Automatic Pause Position For PBX Access Codes

Address FFS 2# 3# (9-18)# (l-3)#

This program inserts a pause in the PBX access code (and in SSD and

codes) after the output of the first, second, or third digit

The pause ensures that the PBX has time to connect to the central office

before the DBS 824 sends the PBX any digits If an adequate pause is not

allowed, the DBS 824 will send digits to the PBX too quickly causing the call

attempt to fail

Different pause sequences can be assigned to each PBX access code

To program an automatic pause

and CPC-M, Version 1 0 and higher

First Digit of PBX Access Code

(see table below)

DBS 824-l O-400

Issued 3/l /95

Table of Contents