Download
Share
Print this page
Musical Fidelity M1 HPAP Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Musical Fidelity Manuals
  4. Amplifier
  5. M1 HPAP
  6. Instructions for use manual
Musical Fidelity M1 HPAP Instructions For Use Manual

Musical Fidelity M1 HPAP Instructions For Use Manual

Hide thumbs Also See for M1 HPAP:

Advertisement

Quick Links

Download this manual See also: Instructions for Use Manual
Instructions for use
Thank you for purchasing the Musical Fidelity M1 HPAP.
The M1 HPAP consists of a pure class A circuit giving exceptional performance into virtually any impedance
headphones. It features two line inputs, as well as a USB input, and a line (loop) output. It also features two
headphone sockets and a set of volume-controlled outputs to enable use as a preamplifier. It is complemented with a
generous power supply circuit, allowing astounding imaging, detail and transparency, to deliver all music types
exactly as the artist originally intended.
The M1 HPAP has been carefully designed to be partnered with M1 series, and also matches well with M3 and M6
series products. These combinations will yield one of the best high-fidelity systems available at any price.
Used carefully, it should give many years of outstanding musical reproduction.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may
harm the surface finish.
If there are any questions about the audio system, please consult the dealer who is there to help and advise.

Advertisement

loading
Need help?

Need help?

Do you have a question about the M1 HPAP and is the answer not in the manual?

Questions and answers

Related Manuals for Musical Fidelity M1 HPAP

Summary of Contents for Musical Fidelity M1 HPAP

  • Page 1 The M1 HPAP has been carefully designed to be partnered with M1 series, and also matches well with M3 and M6 series products. These combinations will yield one of the best high-fidelity systems available at any price.
  • Page 2 Introduction, cleaning, installation, power connections, audio Installation connections, digital connections – Illustrations - main unit front & rear panels Facilities and connections – RCA inputs Operation – USB input – Basic fault finding Problems? Specifications Manual history M1 HPAP issue 1 Page 2 of 11...

  • Page 3: Safety Information

    • If connecting to a BS1363 plug, a 13 amp fuse must be used. WARNING: MODIFICATIONS THIS PRODUCT EXPRESSLY APPROVED BY MUSICAL FIDELITY WHO IS THE PARTY RESPONSIBLE STANDARDS COMPLIANCE COULD VOID USER'S AUTHORITY TO OPERATE THIS EQUIPMENT. M1 HPAP issue 1...

  • Page 4: General Advice

    Heed all warnings shown on the back of the product. • Only connect the M1 HPAP to a mains outlet having the same voltage as marked at the back of the unit. • Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

  • Page 5: Item Disposal Information

    ΠΡΟΣ ΑΠΟΦΥΓΗ ΕΝΔΕΧΟΜΕΝΗΣ ΕΠΙΒΑΡΥΝΣΗΣ ΤΟΥ ΠΕΡΙΒΑΛΛΟΝΤΟΣ, ΞΕΧΩΡΙΣΤΕ ΤΟ ΠΡΟΙΟΝ ΑΠΟ ΤΑ ΑΛΛΑ ΑΠΟΡΡΙΜΑΤΑ ΩΣΤΕ ΝΑ ΕΞΑΣΦΑΛΙΣΘΕΙ Η ΑΝΑΚΥΚΛΩΣΗ ΤΟΥ ΜΕ ΤΟΝ ΠΡΕΠΟΝΤΑ ΤΡΟΠΟ. ΠΑΡΑΚΑΛΟΥΜΕ ΝΑ ΕΠΙΚΟΙΝΩΝΗΣΕΤΕ ΜΕ ΤΗΝ ΤΟΠΙΚΗ ΥΠΗΡΕΣΙΑ ΑΝΑΚΥΚΛΩΣΗΣ Η ΜΕ ΤΟ ΚΑΤΑΣΤΗΜΑ ΑΓΟΡΑΣ ΓΙΑ ΠΕΡΙΣΣΟΤΕΡΕΣ ΛΕΠΤΟΜΕΡΕΙΕΣ. M1 HPAP issue 1 Page 5 of 11...
  • Page 6 If necessary, please refer the dealer who can advise on quality cables for any particular setup. Power Connections The M1 HPAP is supplied with a standard IEC mains cable which plugs into the IEC socket at the back of the unit Output connections RCA pre-outputs: Use good quality RCA phono audio cables (fully connected signal and ground), for optimum signal transfer.
  • Page 7 USB/AUX1/AUX2 input selector switch HEADPHONES output 1 ¼” jack sockets PRE OUTPUTS right and left USB digital input (type “B”) LINE OUTPUTS right and left IEC MAINS INPUT AUX1/AUX2 INPUTS right and left M1 HPAP issue 1 Page 7 of 11...
  • Page 8 The USB input source may be selected for the PRE OUT sockets by selecting USB on the front panel switch. The M1 HPAP is a self contained unit. Therefore it does not mute the speakers in a system (even if using the unit as a preamplifier).
  • Page 9 If none of these actions affect a cure, please contact the dealer, or an authorised Musical Fidelity service agent. Never open the case of the unit, as this will invalidate the guarantee. M1 HPAP issue 1 Page 9 of 11...

  • Page 10: Specifications

    Deep (front to back) 300 mm (12”) including terminals Standard accessories IEC type mains lead (10-Amp type) Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice. M1 HPAP issue 1 Page 10 of 11...
  • Page 11 MANUAL HISTORY RELEASE DATE CHANGES Issue 1 February 2012 M1 HPAP issue 1 Page 11 of 11...