Troubleshooting - Sony Ipela PCS-XC1 Operating Instructions Manual

Troubleshooting

If the unit does not function correctly, check the following.
Symptom Cause
The power of the The power switch is not set to on.
system is not turned
on.
The batteries in the Remote
Commander are low or dead.
The Remote Pairing with the Remote
Commander does Commander fails.
not operate.
No sound or the The volume of the system is too
volume is very low. low.
The volume of the TV monitor is
too low.
The microphone on the remote
party is turned off.
Audio input is not selected
properly.
The microphone or external
equipment is not connected
correctly.
Picture is blurred. Manual focus is selected but picture
remains blurred.
When auto focus is selected, the
background is too bright, contrast is
too high, or the background or the
participants' clothes contain fine
line patterns.
No picture. Movement of the camera is
prevented.
The selected picture source is not
tuned on.
Video input is not selected properly. Select the video input properly (page
The selected picture source is not
correctly connected to the system.
No connection. Wrong number was dialed.
The setting of "Line I/F" is not
correct (when using direct dialing).
Solution
Press the power switch to turn on the
power of the system (page 22).
Replace the batteries with new ones
(page 19).
Perform pairing of the Remote
Commander with the unit (page 20).
Adjust the sound volume by pressing
the VOLUME +/– buttons on the
Remote Commander (page 24).
Adjust the volume of the TV monitor.
Ask the remote party to turn on the
microphone.
Set up "Input Select (MIC)" on the
Basic Setup1 page of the Audio setup
menu properly (page 47).
Check the connection (pages 131 and
132).
Adjust the focus (page 110).
Select manual focus and adjust
manually (page 110).
Turn off the system, then turn it on
again.
Turn on the selected video equipment.
112).
Check the connections (page 132).
Check the entered number.
Set "Line I/F" to correct interface
referring to "Calling a Remote Party
by Entering Their Address or Number
Directly (Direct Dial)" (page 81).
Troubleshooting
163