Configuration Examples - NEC EcoPowerGateway N8142-36F User Manual

4-4 Configuring Your EcoPowerGateway

Configuration Examples

The following describes examples of configuration required to use software-link features or for
system operations.
Time and Date Settings
Select [Main] - [System Time].
Select [Main] - [System Date].
Set the current date and time before starting the system.
Boot
To change the boot order of devices connected to the EcoPowerGateway
Select [Boot] and specify the boot order.
To display POST check results
Select [Advanced] - [Boot-time Diagnostic Screen] - [Enabled].
You can also press Esc while the NEC log is on the screen to display POST check results.
To use the remote wakeup feature of Maintenance Card
Via Modem:
Select [Advanced] – [Advanced Chipset Control] – [Wake on Ring] – [Enabled]
Via RTC alarm:
Select [Advanced] – [Advanced Chipset Control] – [Wake on RTC Alarm] – [Enabled]
To control from the HW console
Select [Server] - [Console Redirection] and set each item.