Notes on Using Your EcoPowerGateway 1-11
Rack
WARNING
Do not use the EcoPowerGateway in any unapproved place.
Install the EcoPowerGateway on a standard EIA 19-inch rack assembly. Do
not install the rack containing the EcoPowerGateway in a place inappropriate
to the rack installation environment.
Failure to follow these instructions may cause some bad influences to be
imposed on the EcoPowerGateway and other devices installed on the rack
and also a fire or personal injury due to falling of the rack may occur. For the
detailed explanation on the place where the rack should be installed and the
earthquake-resistant construction for the rack, refer to the manual attached to
the rack or contact you service representative.
Always install the EcoPowerGateway on a rack conforming to the relevant
standard.
Install the EcoPowerGateway on a rack conforming to the EIA standard. Do
not use the EcoPowerGateway with installed on any other rack than standard
EIA rack or without the installation on a proper rack. Failure to follow these
instructions may cause the EcoPowerGateway to operate incorrectly and/or
personal injury or damages of surrounding devices to occur. Contact your
service representative for the racks available for the EcoPowerGateway.