CoNtENtS CoNtENtS Introduction and packaging contents ..............31 Installation on the bike .................... 32 Installation of the 2 bike ....................33 Start-up ........................33 Display change/key functions/Function overview ........34 Synchronisation ......................34 the basic settings ....................35 Setting the language ....................... 36 Setting KMH/MPH ......................
. Your new ® BC 2209 MHR will provide you reliable service in riding your bike for many years to come. The BC 2209 MHR is a state-of-the-art measuring instrument. Please read instructions carefully to become familiar with the functions and usage of this bicycle computer.
1 INtRoDUCtIoN AND PACkAGING CoNtENtS 1 PACkAGING CoNtENtS Bike computer k Spoke magnet BC 2209 MHR k Cadence magnet k Handlebar bracket k Battery compartment STS chest belt k Wrist strap including elastic belt k Fastening material STS speed transmitter...
(Accessory set “BIKE 2” Ref.-No. 00417, “BIKE 2 incl. cadence” Ref.-No. 00415) 3 StARt-UP For reasons of energy consumption, the BC 2209 MHR is supplied without a battery. Please insert the battery by opening the battery compartment cover with the tool provided. Once you have inserted the battery, close the battery compartment with the aid of the tool.
TOTAL ALTI *not whilst moving 5 SYNCHRoNISAtIoN k Installation of the BC 2209 MHR into the mounting bracket - a pairing is only possible if the bike computer is locked onto the mounting bracket. k The zeros on the speed, cadence and pulse displays are flashing.
2. Turn front wheel or pedals until the KMH or cadence display stops flashing. 2209 k While wearing the chest strap either go close to the BC 2209 MHR or climb on the bicycle. As a rule, the BC 2209 MHR pairs with the chest belt in less than 10 seconds.
2209 k Use MODE 1 button to switch to the preset LANGUAGE (as standard the BC 2209 MHR is preset to English). k Press the SET button briefly. Display flashes. k Set the desired language using the MODE 2 button (+) or the RESET button (-).
Move to the next figure using the MODE 1 button. k Set the value using the MODE 2 button (+) or the RESET button (-). k Confirm by pressing the SET button. SET OK appears on the display. BC 2209 MHR...
6 tHE BASIC SEttINGS 6.5 SEttING HoME ALtI. 2209 2209 2209 2209 2209 You can find explanations about this function in Chapter “8 MEASURING THE ALTITUDE”. k Change the display to HOME ALTI. using the MODE 1 button. k Press the SET button briefly. The first input figure is flashing. k Set the value using the MODE 2 button (+) or the RESET button (-).
Move to the next figure using the MODE 1 button. k Set the value using the MODE 2 button (+) or the RESET button (-). k Confirm by pressing the SET button. SET OK appears on the display. BC 2209 MHR...
6 tHE BASIC SEttINGS 6.8 SEttING tHE CLoCk 2209 2209 2209 2209 2209 k Change the display to CLOCK using the MODE 1 button. k Press the SET button briefly. The hour display will blink. k Set the value using the MODE 2 button (+) or the RESET button (-). k Move to the next figure using the MODE 1 button.
2209 k Use MODE 1 button to switch to the preset GENDER (as standard the BC 2209 MHR is preset to MALE). k Press the SET button briefly. Display flashes. k Set the gender using the MODE 2 button (+) or the RESET button (-).
6 tHE BASIC SEttINGS 6.12 SEttING tHE totAL oDo BIkE 1 oR BIkE 2 2209 2209 2209 2209 2209 k Change the display to ODO BIKE 1 or ODO BIKE 2 using the MODE 1 button. k Press the SET button briefly. The first settings number is flashing. k Set the value using the MODE 2 button (+) or the RESET button (-).
Press the SET button briefly. Display flashes. k Set the value using the MODE 2 button (+) or the RESET button (-). (1 = weak / 3 = strong) k Confirm by pressing the SET button. SET OK appears on the display. BC 2209 MHR...
6 tHE BASIC SEttINGS 6.16 EXItING BASIC SEttINGS k Press the SET button down for 3 seconds in order to stop entering settings (SETTINGS CLOSE flashes). 2209 n 3 sec. 7 GENERAL FUNCtIoNS 7.1 DISPLAY ILLUMINAtIoN k The lighting function is switched on/off when you press the SET and RESET button at the same time.
7 GENERAL FUNCtIoNS 7.3 SHoWING/HIDING tHE CADENCE/HEARt RAtE FUNCtIoN When the BC 2209 MHR is operated without cadence signal transmitter and/ or chest belt, all cadence/heart rate functions (CADENCE, AVG. CAD, PULSE, AVG. PULSE, MAX. PULSE, KCAL) are hidden for this trip.
7 GENERAL FUNCtIoNS 7.6 CoUNtDoWN 2209 2209 2209 2209 2209 3 sec. 3 sec. 2209 2209 2209 2209 Start Stop k Use MODE 2 to switch to COUNTDOWN +/- display. k Hold down SET button for 3 seconds (COUNTDOWN SET flashes). k Set the value using the MODE 2 button (+) or the RESET button (-).
Set the value using the MODE 2 button (+) or the RESET button (-). k Move to the next figure using the MODE 1 button. Set the value as described above. k Confirm by pressing the SET button. SET OK appears on the display. BC 2209 MHR...
7 GENERAL FUNCtIoNS 7.8 RESEt DISPLAY 4 sec. 2209 2209 2209 2209 2209 k Press MODE1/2 until the desired function is displayed. k Hold down the RESET button. Display flashes. After 2 seconds only the function displayed is reset to 0. k Hold down the RESET button for longer than 4 seconds to set the display from: TRIP DIST, TRIP TIME, AVG.
In order to compensate for this change in air pressure one must input a reference altitude in the BC 2209 MHR (the so-called calibration). The BC 2209 MHR has a special function that makes this calibration almost unnecessary:...
The barometric air pressure measurement is activated by movement of the bike or of the BC 2209 MHR, even if the BC 2209 MHR is in sleep mode. This means that the actual altitude is updated regularly when the bike is moved. The built-in movement sensor is so sensitive that the system also works in a car.
9 HIkING MoDE 9.1 INtRoDUCtIoN The BC 2209 MHR can also be used as a hiking computer. For this purpose a separate wrist strap is included in delivery. When the BC 2209 MHR is fitted onto this wrist strap, all bike functions are hidden (these remain saved, however, and can be accessed again when cycling).
9 HIkING MoDE 9.3 SEttING tHE HIkING tIME 2209 2209 2209 Start Stop k Use the MODE 1 button to switch to the HIKING TIME display. k Use the SET button to start or stop the hiking time. icon on the display means the hiking time is running. 9.4 SEttING tHE tARGEt tIME 2209 2209...
HIKINGTIME, TARGETTIME, TRIP CLIMB, MAX. ALTI, AVG. PULSE, MAX. PULSE, KCAL to zero. 9.6 SHoWING/HIDING tHE HEARt RAtE FUNCtIoNS When the BC 2209 MHR is used without a chest belt, all heart rate functions (PULSE, AVG. PULSE, MAX. PULSE, KCAL) for this one hike are hidden. BC 2209 MHR...
No display Display “too MANY SIGNALS” k Have you checked the battery status on the BC 2209 MHR? k Please increase the distance to the k Is the battery inserted correctly other transmitters and press any (+ facing up)? button.
We are liable to our contracting partners for defects as defined by law. Batteries are excluded from the guarantee. SIGMA Elektro GmbH Dr.-Julius-Leber-Straße 15 D-67433 Neustadt/Weinstraße Service-Tel.: +49 (0) 63 21-9120-118 E-Mail: service@sigmasport.com The manufacturer reserves the right to make technical changes. After usage the batterie can be returned. BC 2209 MHR...
Page 31
You can find the CE Declaration under: www.sigmasport.com Prohlašujeme, že tento výrobek odpovídá požadavkům směrnice 1999/5/EC (NV č.426/2000 Sb.) v platném znění. BC 2209 MHR...
Page 32
BIKE COMPUTER TOPLINE SIGMA Elektro GmbH Dr.-Julius-Leber-Straße 15 D-67433 Neustadt/Weinstraße Tel. + 49 (0) 63 21-9120-0 Fax. + 49 (0) 63 21-9120-34 E-mail: info@sigmasport.com SIGMA SPORT USA North America 1067 Kingsland Drive Batavia, IL 60510, U.S.A. Tel. +1 630-761-1106 Fax.
Page 33
BIKE COMPUTER TOPLINE Oder k Remove the yellow foil INSTALLATION BC 1909 HR AND BC 2209 MHR www.sigmasport.com BIKE COMPUTER TOPLINE Max. 30° k Green LED = Bike 1 Max. 90 cm k Red LED k Press > 5 seconds...
Page 34
Only fOr BC 2209 MHr Oder availaBle! k In order to achieve the necessary 12 mm or less install the transmitter and the magnet closer to the wheel Max. 12 mm hub. k Rub water or cardio-gel on the electrodes...
Need help?
Do you have a question about the BC 2209 MHR and is the answer not in the manual?
Questions and answers