Replacing Batteries - Hunter Douglas Duette Owner's Manual

Duette honeycomb powerrise battery operated shades

Hide thumbs Also See for Duette:

Installation operation care (40 pages)

Installation and care (20 pages)

Installation operation care (16 pages)

Table Of Contents

Table of Contents

Replace The Batteries In The Battery Wand

CAUTION: Use only alkaline batteries. Do not use rechargeable batteries.

Install the batteries according to the instructions on the battery wand label.

Install the wand into the

headrail with the label

facing you.

For AA battery wands,

place the end of the

wand with the

non-removable end

cap into the spring

clip. The arrow on the

label of the battery

wand should point

toward the spring clip.

For AAA battery

wands, place the end

of the wand with

the removable end

cap into the spring

clip. The arrow

on the label of the

battery wand should

point toward the

spring clip.

Push the other end

of the wand into the

pivot release clip and

snap closed.

Make sure the wand is

securely seated in both

the spring clip and pivot

release clip.

Close the cover of the

headrail. Allow 30

seconds for the system to

power up.