.
Accessory Kit
These accessories are for supporting the racking of the Lenovo Switched and
Monitored C19/C13 PDU in an Lenovo rack. Some parts may be unused, depending on
how and where the PDU is installed.
Refer to th e
Racking
section for information on racking the Lenovo C19/C13 PDU.
Figure 72: Accessory kit
Also included: 1 x EMP (see below), 1 x DB9 to RJ-45 cable, 1 x CAT5 6ft/1.8m
cable, cable straps, and miscellaneous hardware kit for attaching the PDU and
installing in a rack cabinet.
The 46M4002 PDU ships standard with a PDU environmental sensor kit, as listed
above. Refer to the following
Environmental Monitoring Probe for Monitored PDUs
section for additional details on the device.
134